产品展厅

您当前的位置：网站首页 > 产品展厅 >电线电缆HDPE 3364 NT 杜邦陶氏HDPE 3364 NT

电线电缆HDPE 3364 NT 杜邦陶氏HDPE 3364 NT

品牌：杜邦陶氏

价格： ￥11500/千克
发布日期： 2024-09-14
更新日期： 2024-12-07

产品详请

品牌	杜邦陶氏
货号
用途
牌号	3364 NT
型号	3364 NT
品名	HDPE
生产企业
特性级别	标准级\|\|\|
加工级别	中空级\|\|\|
包装规格
外形尺寸
用途级别	通用级\|\|\|
是否进口

AXELERON™ CS K-3364 NT CPD

High Density Polyethylene Solid Insulation Compound

陶氏塑料

产品说明：

AXELERON™ CS K-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON™ CS K-3364 NT CPD provides excellent processability for high-speed wire insulating extrusion processes.
AXELERON™ CS K-3364 NT CPD provides good performance for telephone insulation applications, primarily cable designs for aerial environments. AXELERON™ CS K-3364 NT CPD is optimized to meet major international age testing standards and specifications for both solid and foam/skin insulation use.
Specifications
AXELERON™ CS K-3364 NT CPD meets the following raw material specifications:

ASTM D 1248 Type III Category A-4, Grade E8 and E9

Federal LP-390 C, II-H, Grades 1 and 2, Category 4

ISO 1872-PE, KHKN,45-D006

Telephone wire insulated with AXELERON™ CS K-3364 NT CPD, using sound commercial extrusion practices, should meet the following cable specifications:

ICEA S-84-608

EN-50290-2-23

IEC 60708

DIN VDE 0819-103

BS 6234 type H03

NF C 32-060

物性信息：

基本信息
用途	薄壁绝缘电话绝缘体电线电缆应用固体绝缘通信电线绝缘材料
机构评级	ASTM D 1248, III, Class A, Cat. 4, Grade E8 ASTM D 1248, III, Class A, Cat. 4, Grade E9 BS 6234 Type H03 EN 50290-2-23 FED L-P-390C, Type II, Class H, Category 4, Grade 1 ICEA S-84-608 IEC 60708 NF C 32-060
形式	粒子

物理性能	额定值	单位制	测试方法
密度	0.947	g/cm3	ASTM D792
熔流率（熔体流动速率） (190°C/2.16 kg)	0.75	g/10 min	ASTM D1238
抗环境应力开裂 (100°C, Igepal, F0)	> 48.0	hr	ASTM D1693

机械性能	额定值	单位制	测试方法
抗张强度	23.4	MPa	ASTM D638
伸长率 (断裂)	500	%	ASTM D638

老化	额定值	单位制	测试方法
拉伸强度保持率 - 48 hrs (100°C)	90	%	ASTM D638
伸长保持率 - 48 hrs (100°C)	90	%	ASTM D638

热性能	额定值	单位制	测试方法
耐热应力裂纹 - F0	> 96	hr	ASTM D2951
脆化温度 1	-76.0	°C	ASTM D746

电气性能	额定值	单位制	测试方法
体积电阻率 (23°C)	> 1.0E+15	ohms·cm	ASTM D257
介电常数 2(1 MHz)	2.32		ASTM D1531
耗散因数 (1 MHz)	6.0E-5		ASTM D1531

挤出	额定值	单位制
熔体温度	218 到 260	°C

挤压说明
AXELERON™ CS K-3364 NT CPD provides excellent surface finish and good output rates over a broad range of extrusion conditions. AXELERON™ CS K-3364 NT CPD is typically extruded at melt discharge temperatures ranging from 218-260°C (425-500°F) using conductor preheats ranging from 110-140°C (230-290°F). Specific extrusion conditions can be recommended only when the application, processing speed and processing equipment details are known.

挤压说明

AXELERON™ CS K-3364 NT CPD provides excellent surface finish and good output rates over a broad range of extrusion conditions. AXELERON™ CS K-3364 NT CPD is typically extruded at melt discharge temperatures ranging from 218-260°C (425-500°F) using conductor preheats ranging from 110-140°C (230-290°F). Specific extrusion conditions can be recommended only when the application, processing speed and processing equipment details are known.